Manual del Ingeniero Mecánico - Tomo 2 Instrumentación, Sistemas, Controles y MEMS

Datos Técnicos
Manual del Ingeniero Mecánico - Tomo 2 Instrumentación, Sistemas, Controles y MEMS
Inglés | PDF | 12.8 MB | Myer Kutz | 2006
ISBN: 13 978-0-471-44990-4 | 1350 Páginas

Contenido
PART 1 INSTRUMENTATION
1. Instrument Statics
3. Bridge Transducers
4. Measurements
5. Temperature and Flow Transducers
6. Signal Processing
7. Data Acquisition and Display Systems
8. Digital Integrated Circuits: A Practical Application
PART 2 SYSTEMS, CONTROLS, AND MEMS
9. Systems Engineering: Analysis, Design, and Information Processing for
Analysis and Design
10. Mathematical Models of Dynamic Physical Systems
11. Basic Control Systems Design
12. Closed-Loop Control System Analysis
13. Control System Performance Modi?cation
14. Servoactuators for Closed-Loop Control
15. Controller Design
16. General-Purpose Control Devices
17. State-Space Methods for Dynamic Systems Analysis
18. Control System Design Using State-Space Methods
19. Neural Networks in Feedback Control Systems
20. Mechatronics
21. Introduction to Microelectromechanical Systems (MEMS):
Design and Application
Index

Descarga

0 comentarios:

Publicar un comentario